Identifying Problems with Your Historic Concrete Block Foundation
To construct foundations for older houses and buildings, using cinder blocks was common at one time. Inadequate maintenance is the primary reason for foundation issues in concrete. While some issues can be solved using a concrete block foundation, others require professional brick walls Albuquerque mason.
Because of the excessive dampness, the coating on the foundation of the concrete block could have begun to peel.
Concrete blocks have been utilized since the Romans' time in various ways. Concrete blocks were utilized in Wisconsin until 1900, along with coal clinkers. Today's concrete block walls in Albuquerque consist of gravel or sand. In the past, cement was widely used.
Concrete blocks from the beginning days were constructed of solid concrete. Concrete blocks that are loaded with heavy-duty are hollow. The honeycomb-shaped top of the block is referred to as a honeycomb.
Concrete Block Foundation Issues
You should hire an expert preservation mason to identify issues with foundations for concrete blocks to determine the cause. This is the most frequent issue with concrete blocks.
-
Concrete blocks that are not mortar or are susceptible to breaking might not contain mortar.
-
Concrete blocks with cracks are often located in your home.
-
The basement in your home is becoming wet because the mortar between concrete blocks is beginning to degrade. Below the ground, there was no waterproofing on the exterior. A skilled mason must be employed to dig up your foundation and then waterproof it. The mason will inspect the mortar for mineral deposits. The foundation may need to be repointed in this instance. To stop water from entering the foundation, the mason must install tiles.
-
The coating of cement on the wall of your foundation (parging) is degrading. It is a great idea to employ a skilled mason to excavate the foundation and make it waterproof. It could be necessary to relocate the foundation. To stop water from entering the foundation, the mason must install tiles.
Historic Mortar Repair for Masonry
Concrete blocks that aren't in good shape are usually damp and decomposing. To remedy this issue, removing the water's foundation is necessary. Gradually slope your foundation, and add ground extenders to the gutter's downspouts.
Clean The Historic Gutters of Your Home
The walls inside the foundation have been painted or parged, and the paint is peeling off and capturing water.
Let the paint and cement disperse, and then let it fall naturally. A layer of paint on concrete blocks in Albuquerque can prevent moisture from leaking. It could cause deterioration or spalling of concrete blocks.
-
External elements like tree roots or water can cause the foundation wall to fall.
-
The fissures in the stair-steps are part of the wall of your foundation.
-
The efflorescence is a white powdery substance that can seep into the bricks.
-
The foundation of your home has collapsed or was heaved.
-
Concrete blocks that aren't adequately sealed may be infested with mold or dirt.
Issues with your Brick Building
-
Your concrete blocks are deteriorating.
-
Concrete blocks are granular and shed sand.
-
While exposed concrete can deteriorate over time, it never affects the foundation's structural strength.
Masonry Albuquerque Contractors
9912 Rio Corto Ave, SW Albuquerque NM 87121
505-503-5948